SMC Metal Maker – Three Features to Consider When Choosing SMC Metal Makers.

SMC Metal Maker – Three Features to Consider When Choosing SMC Metal Makers.

Pipeline and pipe inspection is an important service given to many industries, often oil, gas, chemical and power. The main purpose of SMC metal maker inspection is to maintain and improve the integrity from the plant or system, to prevent failures, ensure safety standards, avoid accidents, comply with government laws and save time and expense.

Pipeline and pipe Inspection uses NDT (Non Destructive Testing) methods to carry out inspections, using highly skilled personal often performing various strategies to determine variety of flaws, size, type and probability of each. Effects are summarised in a report with appropriate graphs and technical drawings to illustrate the an overview of your results after careful analysis by a trained technician.

Several different kinds of piping may be inspected, several of the main types include;

Above ground non insulated piping

Long pipeline runs

Short underground runs

Service Water systems in nuclear plants

Fire protection systems in nuclear plants

The Low Frequency Electromagnetic Technique (LFET) is usually used due to the highly flexible nature. For rapid identification of total flaws, some kit for example the PS-2000 can be used, though it is also put in screening mode to deliver more in depth information, which can then be proved up via another technique such as A-Scan Ultrasonics.

For prolonged pipelines equipment like the LineCat excels. The LineCat is ideally suited to long pipeline inspection, due to the shape, and its self-propulsion. The LineCat is really a rig that wraps throughout the OD (Outer Diameter) of your pipeline, propelling itself at 10 ft/minute. The LineCat uses the LFET technique just like the PS-2000 above, however due to the rapid independent nature, makes SMC industrial pipeline hassle-free, in comparison to a other systems which require manual movement via an operator.

In nuclear plants the key concerns of piping inspections are service water system piping and fire protection system piping. These are typically inspected to quantify MIC (Micro-biologically induced corrosion) and FAC (Flow accelerated corrosion).

For shorter underground piping runs, equipment such as the Eagle-2000 system could be utilised. The Eagle-2000 uses SMC alu pipe, and performs inspections 17dexypky the ID (Inner Diameter), getting on small flaws because of its high res and small sensor size. It may provide realtime 3d data to analyse flaws live, and inspects through scale.

During inspection exactly the same types of flaws often arise, attack by internal and external corrosion are standard, in addition to cracking, though third party damage is one of the main culprit for many of the major flaws. Flaws caused throughout the manufacturing process can be picked up on also, though they’re generally rare into the future across.